Model No: TULUX
Diesel Engine Oil SINOPEC
CK-4,CI-4,CH-4，15W-40，20W-50，T300，T400，T500，T600，T700
Quantity :
Subscribe to our Newsletter
Sinopec TULUX T600 15W-40 Diesel Engine Oil
Product description
Sinopec TULUX T600 15W-40 Diesel Engine Oil is is formulated with hydrocracked high viscosity index base oils and advanced multifunctional environmental-friendly additive technology to meet the requirements of a wide range of engine manufacturers.
Suitable for pre EPA 2007 diesel engines ,where excellent soot control is required.Also suitable for use in engines with or without EGR systems.
Available sizes
1L/4L/5L ，PAIL –18L ，DRUM –200L
Applications
Sinopec TULUX T600 15W-40 Diesel Engine Oil is suitable for use in:
- Heavy duty diesel engines (HDDE)fitted with exhaust after-treatment systems ,e.g.exhaust gas recirculation (EGR), diesel particulate filters (DPF).
- Heavy duty diesel engines operating continuously under very high speed,high temp or heavy load conditions , including on and off highway ,trucking ,bus,mining,construction ,agriculture and marine applications in the world’s harshest environment.
- Fully backwards compatible to those older HDDE using conventional designs without exhaust after-treatment systems.
- Heavy duty diesel engines requiring API CK-4 ,CJ-4 and earlier categories or ACEA E4/E6/E7/E9 from America , Europe and Japan.
Features and benefits
By using Synthetic Technology hydrocracked base oils and the superior additive packages ,Sinopec has produced the most advanced mixed fleet DEO seen in the market for over a decade:
- Extended long term protection and proven longevity of DPF and SCR.
- Excellent oil oxidation resistance and improved control of the piston deposits,preventing formation of sludge and piston deposits ,keeping engine clean and reducing energy loss.
- High performance in both on and off-highway heavy-duty applications.
- Extended drain intervals ,reduced downtime and increased profitability.
- Excellent low-temperature start up and high temperature performance ,suitable for wide temperature range
Typical data
SINOPEC TULUX T600 15W-40 Diesel Engine Oil | |
SAE grade | 15W-40 |
Kinematic viscosity ,cSt @100℃,ASTM D 445 | 14.93 |
High-temperature ,high-shear viscosity (HTHS),cP @150℃,ASTM D4683 | 3.90 |
Total base number,mg KOH/g,ASTM D 2896 | 9.5 |
Pour point ,℃,ASTM D 97 | -34 |
These data are given as an indication of typical values , not as exact specifications.
Industry and OEM specifications
Sinopec TULUX T600 15W-40 Diesel Engine Oil meets the performance requirements of the following industry specifications: | |
API Service Classification | Diesel:CK-4 ,CJ-4 ,CI-4 Plus,CI-4 ,CH-4 ,CG-4 ,CF-4 and earlier HDDEO specifications |
ASTM | D4485 |
Accuracy of information
Data provided in this PDS is typical and subject to change as a result of continuing product research and development.The information given was correct at the time of printing.The typical values given are subject to variations in the testing procedures and the manufacturing process may also result in slight variations.Sinopec guarantees that its lubricants meet any industry and OEM specifications referred to on this data sheet.
Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling.Information on best practice is available from your local distributor.
Product and environmental safety
This product should not cause any health problems when used in the applications suggested and when the guidance provided in the Safety Data Sheet (SDS)is followed.Please consult the SDS for more detailed advice on handling;SDSs are available from your local distributor.Do not use the product in applications other than those suggested.
As with all products,please take care to avoid environmental contamination when disposing of this product.Used oil should be sent for reclamation/recycling or,if not possible,must be disposed of according to relevant government/authority regulations. The SINOPEC trademark is registered and protected.
