Model No: J600F SP/GF-6A 5W-30
Gasoline Engine Oil SINOPEC
API-SP,API-SQ 5W-30,5W-40,0W-20,J400,J500,J600,J700
Quantity :
Subscribe to our Newsletter
Justar J600F SP/GF-6A 5W-30 Gasoline Oil
Product description
Justar J600F SP/GF-6A 5W-30 Gasoline Oilis formulated with synthetic base oils and high-quality multifunctional additives.It provides excellent oxidation resistance,deposit and wear protection and can helps to achieve better fuel economy.
Available sizes
1L/4L/5L， PAIL –18L， DRUM –200L
Applications
- Recommended for the lubrication of American and Asian cars,SUVs,MPVs and other vehicles.Especially suitable for use with exhaust emission technologies (GPF/TWC,etc.),turbocharger,director injectors (TGDI/GDI),dual injection ,variable valves timing (VVT),automatic start-stop ,timing chain ,hybrid powered and other modern vehicle setup.
Features and benefits
- Low SAPS environmentally friendly formula provides comprehensive lubrication for vehicles;
- Excellent cleaning and dispersing performance,maintaining efficient operation of engine components such as pistons and turbochargers,and reducing the risk of full cycle knock (LSPI);
- Effectively forming oil film,reducing vehicle cold start wear,and providing good protection for rubber materials.
Typical data
Justar J600F SP/GF-6A 5W-30 Gasoline Oil | |
SAE grade | 5W-30 |
Kinematic viscosity ,cSt @100℃,ASTM D 445 | 10.82 |
Kinematic viscosity ,cSt @40℃,ASTM D 445 | 60.79 |
Viscosity Index ,ASTM D2270 | 171 |
Density ,kg/l@20°C,ASTM D4052 | 0.846 |
Sulfated ash,wt%,ASTM D874 | 0.8 |
CCS,cP @-30℃,ASTM D5293 | 5049 |
High-temperature ,high-shear viscosity (HTHS),cP @150℃,ASTM D4683 | 3.2 |
Total base number,mg KOH/g,ASTM D 2896 | 7.4 |
Pour point ,℃,ASTM D 97 | -39 |
Flash point (COC),℃,ASTM D 92 | 228 |
These data are given as an indication of typical values,not as exact specifications.
Industry and OEM specifications
Justar J600F SP/GF-6A 5W-30 Gasoline Oil meets the performance requirements of the following industry specifications: | |
API Service Classification | Gasoline:SP |
ILSAC | GF-6A |
ASTM | D4485 |
Accuracy of information
Data provided in this PDS is typical and subject to change as a result of continuing product research and development.The information given was correct at the time of printing.The typical values given are subject to variations in the testing procedures and the manufacturing process may also result in slight variations.Sinopec guarantees that its lubricants meet any industry and OEM specifications referred to on this data sheet.
Sinopec cannot be held responsible for any deterioration in the product due to incorrect storage or handling.Information on best practice is available from your local distributor.
Product and environmental safety
This product should not cause any health problems when used in the applications suggested and when the guidance provided in the Safety Data Sheet (SDS)is followed.Please consult the SDS for more detailed advice on handling;SDSs are available from your local distributor.Do not use the product in applications other than those suggested.
As with all products,please take care to avoid environmental contamination when disposing of this product.Used oil should be sent for reclamation/recycling or,if not possible,must be disposed of according to relevant government/authority regulations. The SINOPEC trademark is registered and protected.
